Thermal shutter doors are a special function with the shutter doors, the main feature is particularly excellent insulation performance. Thermal insulation shutter doors are made of aluminum alloy or galvanized steel sheet.
Thermal insulation shutter doors with double-layer galvanized steel color to suppress, filling the ammonia fat foam raw materials, Heat Insulation Rolling Door Equipment the appearance of the use of advanced powder coating surface treatment process, set decoration, protection functions in one.
Thermal insulation shutter installation technical parameters:
1. Insulation shutter door is a traditional shutter shutter replacement, the door with double-layer galvanized steel color to suppress, filling the amine fat foam raw materials, Heat Insulation Rolling Door Equipment the appearance of the use of advanced powder coating surface treatment process, set decoration, One.
2. Open the way advanced, there are manual, electric, remote control, and has the function of automatic locking, simple operation, the use of safe, Heat Insulation Rolling Door Equipment quiet features are the traditional shutter doors can not match.
3. A variety of colors, a variety of styles, according to the needs of customers.
Heat insulation shutter equipment materials: curtain new metal information double-roll forming, the middle filled with non-hydrocarbon fluoride polyurethane foam insulation information, Heat Insulation Rolling Door Equipment improve the bending resistance of profiles, and to avoid the presentation of condensate; double hollow Aluminum alloy door, the strength is very good, solid and solid. We can reach the concierge through an authentic channel from the gates. In the middle of the tunnel or two, there will be one or more layers of the gate. Heat Insulation Rolling Door Equipment Insulation material of the open space structure is divided into connected type, closed type, semi-closed type, except for a small number of organic foam open space mostly closed, the wood, steel non-corrosive, the product of water absorption of 50g / (m2 .h), only about 1/10 of similar goods. Low water absorption is different from the usual inorganic insulation materials is an important feature.
Installation method of insulated shutter doors
1, in the installation of the door frame frame marked the corresponding location, and specify the size, it should be noted that the height of the box is higher than the height of the door. The thermal shutter doors installed on the outside of the door usually raise the K of the door by at least 45% and ensure that the distance between the roller panel and the door frame is ≥40mm. 2, in order to be insulated shutter doors of the door frame is fixed, first demolition of the lower part of the door frame fixed plate, Heat Insulation Rolling Door Equipment on both sides of the hole in the hole to be reserved in advance, and then corrected, to be qualified after the fixed wooden wedge, Prefabricated iron plate welding. 3, the installation of the main door, pay attention to ensure that the insulation shutter doors and walls to form a whole, closed to do a good job, and then paint the hole and the wall. After the paint is finished, the door should be evenly formed, open the thermal shutter doors should be free and light, not too tight, too loose and rebound phenomenon.